Home > News > Instrument News > CS-3D metal detector
Contact us
Shenzhen Handsome Technology Co.,Ltd. Walcom Int'l Industry Ltd. Address: Rm# 2102, 21/F, HuaJia Plaza, No.2216, Hubei Road, Luohu District, Shenzhen,...
Contact Now
Certifications

News

CS-3D metal detector

  • Author:Alice
  • Release on :2015-02-24
CS-3D metal detector
When you you detecting,keep 10-15cm move above ground,don't distance a lot ,or will affect the depth you detecting.
1)detecting with ground balance
This is way avoid distraction from mineral substance ,it is the best way detecting .with this way ,when plate above target instrument will continue ring.the pointer will deflection
How to adjust the sensitivity
Turn the level to ground balance, Up plate 1.5m from ground,Press the key ,turn on power and turn on critical sound,then relax the key ,Let the plate near ground about 10-15 cm,if the ring up ,up the palte and press the key ,then turn knod left a little.test again. If the voice down ,turn right .until the voice have no change when plate up and down.
2)detecting with distinguish
It can differentiate non-ferrous metal and ferrous metal in this way.and you can based on instrument and voice to choose whether the metal you need or not .but it can not avoid the effect of soil structure ,so it need to keep the distance between plate and ground ,then move slowly
How to adjust the sensitivity
Turn switch to level distinguish,Press the key ,turn on power adjust critical voice ,Based on what you need ,avoid some metal unnecessary.if you need not iron,just test the response to iron , if the ring up ,up the palte and press the key ,then turn knod left a little.test again. If the voice down ,turn right .until the voice have no change when plate up and down.
Adjust the work on the following scale 2, a chunk of the non-ferrous metals to make the sound increase, a large black metal to make the sound decreased; Adjust the work on 7 above, a chunk of the non-ferrous metals to make the sound of a large decrease of the black metal to make the sound increased.

Specification
Detection prompts sound/LED refers to the table display
Mine ralization probing depth of 6 m
Detection mode to balance/means of identification
Detection frequency of458KHZ ± 5KHZ
Headphone frequency of455KHZ ± 5KHZ
Power1W
Operating temperature10°Cto60 ° C
Storage Temperature-28 ℃ ~ 65 ℃
External headset features black headphones
Boot LED display LED display
Power supply 12V rechargeable battery
Product Net Weight3.7KG
Product size30*30*117CM
Packaging carton
Standard Carton Volume 1
Standard Carton Size51.5 * 33.5 * 12.5CM
Standard Carton Gross Weight3.9KG